 |
 |
 |
|
Dirt Bike V3 Fat Bar Stabilizer Kit
(For Stock Triple Clamp)
The new GPR V3 Stabilizer features the transferability of the original V1 stabilizer and the safe 'under bar' location of the V2 while virtually maintaining the stock bar height. The V3 is manufactured with an internal damper cavity, allowing the damper to counter sink around the steering stem, resulting in an under bar stabilizer that is only 1/4" taller than the stock bar height. In addition to the safety, transferability and stock bar height features, the V3 Stabilizer offers the rider a remote adjustment dial via hydraulic hoses that is located next to your clutch or left hand grip. This 'grip shift' adjuster dial allows instantaneous fluid flow adjustment on the fly without the rider having to remove their hand from the bars to adjust the damper settings. The V3 adjuster dial features the full 1-8 range of adjustment as the newly redesigned V1 and V2 stabilizers. Available in early 2005 for both fat bar and pro fat bar kits for select model dirt bikes from the late 90's through present. Kits include V3 specific upper and lower bar perches, V3 damper w/ remote adjuster, postmount/pin, upper triple clamp on pro kits and V3 bar pad
|
|
|
|
|
|
|
|
|
